How to degrease aluminum and its alloy parts?

November 05, 2019

Aluminum is a very active metal, it is amphoteric metal. Degreasing of aluminum alloys is mostly carried out in alkaline degreasers, and the alkali content is strictly controlled.

{O7W)QFQMVZY{6ZA%0]J~U0

Pretreatment of aluminum and its alloys is particularly important for plating quality. It is generally required to first perform crude degreasing with organic solvents (such as kerosene, gasoline, trichloroethylene, carbon tetrachloride, etc.), and then transfer to chemical degreasing. Fire alkali content can not exceed 5g / L, the total amount of inorganic salt should not exceed l00g / L, pH value between 8 ~ l0 is appropriate, the use of temperature is generally not more than 80 °C, it is better to use the replacement degreaser at room temperature is better . After polishing the polishing paste, the aluminum and its alloy parts are preferably first immersed for 2-5 minutes in a weakly alkaline wax-removing water to remove the wax (preferably using an ultrasonic wave to remove the wax), and then transferred to a chemical degreasing agent to remove oil.

Aluminum and its alloy parts should not use electrolytic degreasing. If electrolytic degreasing, we must control the content of inorganic salt can not be greater than 50g / L, the temperature is less than 70 °C, the time is less than 1min is appropriate. Otherwise, it will be over-etched, and the cathode must be electrolytically degreasing.

Degreasing of aluminum alloys has also been reported in the degreasing of phosphoric and sulfuric acid media (adding surfactants).

Stainless Steel Standoffs
Carbon Steel Standoffs
Vibration Damper Screw
Vibration Rubber Damper With Screw
Rubber Vibration Damper Screw
Anti Vibration Screw
Nylon Tip Set Screw
Insulating Nylon Screw

The above is the How to degrease aluminum and its alloy parts? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Precision aluminum alloy structural parts will become mainstream

Next:Canada takes steps to develop aluminum auto parts