Why choosing carbon fiber plate ?

The CF is very very stiff and it could be a problem when you are hunting vibrations. In CF the vibrations are very well transmitted longitudinally along of the carbon fiber.

Another problem is in case of crash: if you crash the frame in the direction of the carbon fiber, it will transmit all the energy along the fiber due to the stiffness.
It's rare but when it happens, you will break what is clamped at the end of this part (generally center plate or electronics).

The important thing to understand about Carbon Fiber is that the tows of carbon have to be orientated along the lines of stress.

Take for example the suspension of a modern F1 car. It is very strong along the lines where the loads are focused but very fragile in most other directions.

In the case of the 1001 copter frame those cut outs that make for a nice alum. frame would be riddled with stress raisers in anything but multi directional weaves of carbon. The fragile tows of carbon substrate must remain intact and not broken before curing if it is to deliver the strength/weight advantages.

Our company has been focused on this field for nearly ten years with good quality and pretty competitive peice.

Any needs,don't hesitate to contact me.

We will try our best to support you.