Home> Industry Information> ​What are the processing characteristics and uses of aluminum alloy parts?​

​What are the processing characteristics and uses of aluminum alloy parts?​

October 31, 2019

​What are the processing characteristics and uses of aluminum alloy parts?​

The main rivet material used for riveting aluminum alloy parts processing structure has low strength after quenching and natural aging, but has high plasticity and good process performance, the same weldability, good cutting performance and low corrosion resistance. Widely used as medium strength and working temperature.

2}7O`GX)O06_$`@P@D)V5EU


Aluminum alloy parts processing is the most widely used rust-proof aluminum. Its strength is not high, it can not be heat-treated and strengthened. It has high plasticity in the annealed state, good corrosion, good weldability and poor machinability. Used in the manufacture of low-load parts such as fuel tanks, oil pipes, liquid containers, etc. that require high plasticity and good weldability, working in liquid or gaseous media; wire can be used to make rivets. High corrosion resistance and good welding performance. Thermal conductivity and electrical conductivity are much lower than pure aluminum. It can be strengthened by cold deformation processing without heat treatment strengthening.

Suitable for welding structural parts. The magnesium content of aluminum-magnesium rust-proof aluminum is slightly higher than the strength, the heat treatment can not be strengthened, the plasticity in the annealing state is high, the semi-cold is hardened and the plasticity is medium, the welding performance is still good, and it is used for making welded parts, pipes and working in liquid. Containers and other parts. It has high strength and corrosion resistance, and the plasticity is good under annealing and extrusion. The weld tightness and plasticity of argon arc welding are acceptable. Good machinability. Used for welding containers, stressed parts, aircraft skins and skeleton parts.

It is a non-heat-treated reinforced aluminum alloy with a certain strength, good corrosion resistance and machinability. After anodizing, the surface is beautiful and can be processed into optical mechanical parts, ship parts and wire clamps. The strength is relatively high, the plasticity and corrosion resistance are high, the heat treatment can not be strengthened, the weldability is good, and the machinability in the cold work hardening state is good, and the polishing can be performed. Used to make medium strength weldments, cold stamped parts and containers that work in liquids.

Stainless Steel Standoffs
Carbon Steel Standoffs
Vibration Damper Screw
Vibration Rubber Damper With Screw
Rubber Vibration Damper Screw
Anti Vibration Screw
Nylon Tip Set Screw
Insulating Nylon Screw



The above is the ​What are the processing characteristics and uses of aluminum alloy parts?​ we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> ​What are the processing characteristics and uses of aluminum alloy parts?​

Copyright © 2024 Shenzhen Feimoshi Technology Limited. (HOBBY CARBON CNC LTD.) All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send