Home> Industry Information> Characteristics and application of processing materials for stainless steel parts

Characteristics and application of processing materials for stainless steel parts

December 02, 2019

Characteristics and application of processing materials for stainless steel parts

Characteristics and application of processing materials for stainless steel parts


Generally used in the manufacture of carburizing and welding parts, such as connecting rods, pins, camshafts, gears, couplings, hinges, etc. 

GSY2UP[I413V0E26K@2$6F8


The quasi-deformation plasticity is very good, the cold workability and the weldability are very high, but the composition segregation tends to be large, and the toughness of the steel decreases after aging treatment (the aging sensitivity is obvious), so the cold-worked parts are often water-resistant and tough. Treatment and stress relief to eliminate aging sensitivity, low strength and hardness, but low production costs. 

Commonly used in the production of steel strips, thin sheets and cold drawn steel wire, low carbon carburized steel, stainless steel "target=_blank> stainless steel parts processing, the characteristics of the 15 steel is similar, but the strength is slightly higher than it. For steel with small diameter or thickness, The heat treatment is carried out on a trial blank having the same cross-sectional dimensions as the finished product. 

High-quality carbon structural steel products include hot-rolled round steel, square steel, hexagonal steel, flat steel, cold drawn round steel, forged round steel, hot-rolled steel plate, steel strip, etc., and their dimensional specifications comply with relevant standards and regulations. 

Good toughness, high elongation, good weldability, aluminum alloy processing, used in the manufacture of bolts, furnace supports, tie rods, ploughs, short shafts, brackets, welded parts, etc., used in hot rolling or normalizing conditions For the production of parts with low load but toughness requirements, forged and pressed rods, levers, shackles, sleeves, clamps and gaskets in heavy duty and general machinery. 


Carbon Mixed Glass Tube
Carbon Glass Tubes For Drone
Higt-Strength Carbon Glass Tubes
CNC Customized Hardware
Cnc Machining Parts
CNC Aluminum Parts
Aluminum Machined Parts


The above is the Characteristics and application of processing materials for stainless steel parts we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Characteristics and application of processing materials for stainless steel parts

Copyright © 2024 Shenzhen Feimoshi Technology Limited. (HOBBY CARBON CNC LTD.) All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send